MRI Blood Flow Simulation Helps Plan Pediatric Heart Surgery
By MedImaging International staff writers Posted on 04 Sep 2009 |
Researchers collaborating with pediatric cardiologists and surgeons from two U.S. medical institutions have developed a tool for virtual surgery that allows heart surgeons to view the predicted effects of different surgical approaches.
By manipulating three-dimensional (3D) cardiac magnetic resonance images (MRI) of a patient's specific anatomy, physicians can compare how alternative approaches affect blood flow and expected outcomes, and can select the best approach for each patient before entering the operating room. "This tool helps us to get the best result for each patient,” said coauthor Mark A. Fogel, M.D., an associate professor of cardiology and radiology, and director of cardiac MRI at the Children's Hospital of Philadelphia (PA, USA). "The team can assess the different surgical options to achieve the best blood flow and the optimum mixture of blood, so we can maximize the heart's energy efficiency.”
In the August 2009 issue of the Journal of the American College of Cardiology: Cardiovascular Imaging, the researchers described the surgical planning strategy, detailing how the application helped them to plan the surgery of a four-year-old girl who was born with just one functional ventricle, or pumping chamber, instead of two.
Two in every 1,000 babies in the United States alone are born with this type of single ventricle heart defect. These children typically suffer from low levels of oxygen in their tissues because their oxygen-rich and oxygen-poor blood mix in their one functional ventricle before being redistributed to their lungs and body.
To correct this, the children undergo a series of three open-heart surgeries called the staged Fontan reconstruction to reshape the circulation in a way that allows oxygen-poor blood to flow from the limbs directly to the lungs without going through the heart. While these vascular modifications can eliminate blood mixing and restore normal oxygenation levels, surgeons and cardiologists must ensure that the lungs will receive proper amounts of blood and nutrients after the surgery so that normal development occurs.
"Preoperatively determining the Fontan configuration that will achieve balanced blood flow to the lungs is very difficult and the wide variety and complexity of patients' anatomies requires an approach that is very specific and personalized,” said Ajit Yoganathan, Ph.D., a professor in the department of biomedical engineering at Georgia Institute of Technology (Georgia Tech; Atlanta, USA). "With our surgical planning framework, the physicians gain a better understanding of each child's unique heart defect, thus improving the surgery outcome and recovery time.”
The patient described in the study, a girl, age four, from Staten Island (NY, USA) had previously undergone all three stages of the Fontan procedure at the Children's Hospital of Philadelphia, but developed severe complications. Her oxygen saturation was very low only 72%, compared to normal levels of at least 95%, which indicated the possibility of abnormal connections between the veins and arteries in one of her lungs. Typically, the liver releases hormonal factors that prevent these abnormal connections, so the presence of the malformations indicated a low supply of hepatic blood to the lung.
To improve the distribution of these hormonal factors to both lungs, the surgeons needed to operate again and reconfigure the patient's cardiovascular anatomy. Georgia Tech's surgical planning framework helped Thomas L. Spray, M.D., chief of the division of cardiothoracic surgery at Children's Hospital, to determine the optimal surgical option. "MRI acquires images of the child's heart without using radiation,” said Dr. Spray. "Then we use the computerized technology to model different connections to simulate optimum blood flow characteristics, before we perform the surgery.”
The image-based surgical planning consisted of five major steps: acquiring MR images of the child's heart at different times in the cardiac cycle, modeling the preoperative heart anatomy and blood flow, performing virtual surgeries, using computational fluid dynamics to model the proposed postoperative flow, and measuring the distribution of liver-derived hormonal factors and other clinically relevant parameters as feedback to the surgeon.
Dr. Fogel collected three different types of MR images, and Dr. Yoganathan, along with graduate students Kartik Sundareswaran and Diane de Zélicourt, generated a three dimensional model of the child's cardiovascular anatomy. From the model, they reconstructed the three-dimensional preoperative flow fields to understand the underlying causes of the malformations.
For this particular patient, the team saw a highly uneven flow distribution the left lung was receiving about 70% of the blood pumped out by the heart, but only 5% of the hepatic blood. Both observations suggested left lung malformations, but closer examination of the flow structures in that particular patient revealed that the competition between different vessels at the center of the original Fontan connection effectively forced all hepatic factors into the right lung even though a vast majority of total cardiac output went to the left lung.
To facilitate the design of the surgical options that would correct this problem, Jarek Rossignac, Ph.D., a professor in Georgia Tech's School of Interactive Computing, developed Surgem, an interactive geometric modeling environment that allowed the surgeon to use both hands and natural gestures in three-dimensions to grab, pull, twist, and bend a 3D computer representation of the patient's anatomy. After analyzing the 3D reconstruction of the failing cardiovascular geometry, the team considered three surgical options.
The research team then performed computational fluid dynamics simulations on all three options to investigate for each how well blood would flow to the lungs and the amount of energy required to drive blood through each connection design. These measures of clinical performance allowed the cardiologists and surgeons to conduct a risk/benefit analysis, which also included factors such as difficulty of completion and potential complications.
Of the three choices, Dr. Spray favored the option that showed a slightly higher energy cost but exhibited the best performance concerning hepatic factor distribution to the left and right lungs. Five months after the surgery, Dr. Mayer showed a dramatic improvement in her overall clinical condition and oxygen saturation levels, which increased from 72-94%. The child is breathing easier and is now able to play actively like other children, according to her cardiologist.
"The ability to perform this work is a team effort,” Dr. Fogel added. "State-of-the-art three-dimensional cardiac MRI married to modern biomedical engineering and applied anatomy and physiology enabled this approach. With the advanced pediatric cardiothoracic surgery we have here at The Children's Hospital of Philadelphia, patients can benefit from this new method.”
Related Links:
Children's Hospital of Philadelphia
Georgia Institute of Technology
By manipulating three-dimensional (3D) cardiac magnetic resonance images (MRI) of a patient's specific anatomy, physicians can compare how alternative approaches affect blood flow and expected outcomes, and can select the best approach for each patient before entering the operating room. "This tool helps us to get the best result for each patient,” said coauthor Mark A. Fogel, M.D., an associate professor of cardiology and radiology, and director of cardiac MRI at the Children's Hospital of Philadelphia (PA, USA). "The team can assess the different surgical options to achieve the best blood flow and the optimum mixture of blood, so we can maximize the heart's energy efficiency.”
In the August 2009 issue of the Journal of the American College of Cardiology: Cardiovascular Imaging, the researchers described the surgical planning strategy, detailing how the application helped them to plan the surgery of a four-year-old girl who was born with just one functional ventricle, or pumping chamber, instead of two.
Two in every 1,000 babies in the United States alone are born with this type of single ventricle heart defect. These children typically suffer from low levels of oxygen in their tissues because their oxygen-rich and oxygen-poor blood mix in their one functional ventricle before being redistributed to their lungs and body.
To correct this, the children undergo a series of three open-heart surgeries called the staged Fontan reconstruction to reshape the circulation in a way that allows oxygen-poor blood to flow from the limbs directly to the lungs without going through the heart. While these vascular modifications can eliminate blood mixing and restore normal oxygenation levels, surgeons and cardiologists must ensure that the lungs will receive proper amounts of blood and nutrients after the surgery so that normal development occurs.
"Preoperatively determining the Fontan configuration that will achieve balanced blood flow to the lungs is very difficult and the wide variety and complexity of patients' anatomies requires an approach that is very specific and personalized,” said Ajit Yoganathan, Ph.D., a professor in the department of biomedical engineering at Georgia Institute of Technology (Georgia Tech; Atlanta, USA). "With our surgical planning framework, the physicians gain a better understanding of each child's unique heart defect, thus improving the surgery outcome and recovery time.”
The patient described in the study, a girl, age four, from Staten Island (NY, USA) had previously undergone all three stages of the Fontan procedure at the Children's Hospital of Philadelphia, but developed severe complications. Her oxygen saturation was very low only 72%, compared to normal levels of at least 95%, which indicated the possibility of abnormal connections between the veins and arteries in one of her lungs. Typically, the liver releases hormonal factors that prevent these abnormal connections, so the presence of the malformations indicated a low supply of hepatic blood to the lung.
To improve the distribution of these hormonal factors to both lungs, the surgeons needed to operate again and reconfigure the patient's cardiovascular anatomy. Georgia Tech's surgical planning framework helped Thomas L. Spray, M.D., chief of the division of cardiothoracic surgery at Children's Hospital, to determine the optimal surgical option. "MRI acquires images of the child's heart without using radiation,” said Dr. Spray. "Then we use the computerized technology to model different connections to simulate optimum blood flow characteristics, before we perform the surgery.”
The image-based surgical planning consisted of five major steps: acquiring MR images of the child's heart at different times in the cardiac cycle, modeling the preoperative heart anatomy and blood flow, performing virtual surgeries, using computational fluid dynamics to model the proposed postoperative flow, and measuring the distribution of liver-derived hormonal factors and other clinically relevant parameters as feedback to the surgeon.
Dr. Fogel collected three different types of MR images, and Dr. Yoganathan, along with graduate students Kartik Sundareswaran and Diane de Zélicourt, generated a three dimensional model of the child's cardiovascular anatomy. From the model, they reconstructed the three-dimensional preoperative flow fields to understand the underlying causes of the malformations.
For this particular patient, the team saw a highly uneven flow distribution the left lung was receiving about 70% of the blood pumped out by the heart, but only 5% of the hepatic blood. Both observations suggested left lung malformations, but closer examination of the flow structures in that particular patient revealed that the competition between different vessels at the center of the original Fontan connection effectively forced all hepatic factors into the right lung even though a vast majority of total cardiac output went to the left lung.
To facilitate the design of the surgical options that would correct this problem, Jarek Rossignac, Ph.D., a professor in Georgia Tech's School of Interactive Computing, developed Surgem, an interactive geometric modeling environment that allowed the surgeon to use both hands and natural gestures in three-dimensions to grab, pull, twist, and bend a 3D computer representation of the patient's anatomy. After analyzing the 3D reconstruction of the failing cardiovascular geometry, the team considered three surgical options.
The research team then performed computational fluid dynamics simulations on all three options to investigate for each how well blood would flow to the lungs and the amount of energy required to drive blood through each connection design. These measures of clinical performance allowed the cardiologists and surgeons to conduct a risk/benefit analysis, which also included factors such as difficulty of completion and potential complications.
Of the three choices, Dr. Spray favored the option that showed a slightly higher energy cost but exhibited the best performance concerning hepatic factor distribution to the left and right lungs. Five months after the surgery, Dr. Mayer showed a dramatic improvement in her overall clinical condition and oxygen saturation levels, which increased from 72-94%. The child is breathing easier and is now able to play actively like other children, according to her cardiologist.
"The ability to perform this work is a team effort,” Dr. Fogel added. "State-of-the-art three-dimensional cardiac MRI married to modern biomedical engineering and applied anatomy and physiology enabled this approach. With the advanced pediatric cardiothoracic surgery we have here at The Children's Hospital of Philadelphia, patients can benefit from this new method.”
Related Links:
Children's Hospital of Philadelphia
Georgia Institute of Technology
Latest Nuclear Medicine News
- Novel Radiolabeled Antibody Improves Diagnosis and Treatment of Solid Tumors
- Novel PET Imaging Approach Offers Never-Before-Seen View of Neuroinflammation
- Novel Radiotracer Identifies Biomarker for Triple-Negative Breast Cancer
- Innovative PET Imaging Technique to Help Diagnose Neurodegeneration
- New Molecular Imaging Test to Improve Lung Cancer Diagnosis
- Novel PET Technique Visualizes Spinal Cord Injuries to Predict Recovery
- Next-Gen Tau Radiotracers Outperform FDA-Approved Imaging Agents in Detecting Alzheimer’s
- Breakthrough Method Detects Inflammation in Body Using PET Imaging
- Advanced Imaging Reveals Hidden Metastases in High-Risk Prostate Cancer Patients
- Combining Advanced Imaging Technologies Offers Breakthrough in Glioblastoma Treatment
- New Molecular Imaging Agent Accurately Identifies Crucial Cancer Biomarker
- New Scans Light Up Aggressive Tumors for Better Treatment
- AI Stroke Brain Scan Readings Twice as Accurate as Current Method
- AI Analysis of PET/CT Images Predicts Side Effects of Immunotherapy in Lung Cancer
- New Imaging Agent to Drive Step-Change for Brain Cancer Imaging
- Portable PET Scanner to Detect Earliest Stages of Alzheimer’s Disease
Channels
Radiography
view channel
AI Improves Early Detection of Interval Breast Cancers
Interval breast cancers, which occur between routine screenings, are easier to treat when detected earlier. Early detection can reduce the need for aggressive treatments and improve the chances of better outcomes.... Read more
World's Largest Class Single Crystal Diamond Radiation Detector Opens New Possibilities for Diagnostic Imaging
Diamonds possess ideal physical properties for radiation detection, such as exceptional thermal and chemical stability along with a quick response time. Made of carbon with an atomic number of six, diamonds... Read moreUltrasound
view channel.jpeg)
AI-Powered Lung Ultrasound Outperforms Human Experts in Tuberculosis Diagnosis
Despite global declines in tuberculosis (TB) rates in previous years, the incidence of TB rose by 4.6% from 2020 to 2023. Early screening and rapid diagnosis are essential elements of the World Health... Read more
AI Identifies Heart Valve Disease from Common Imaging Test
Tricuspid regurgitation is a condition where the heart's tricuspid valve does not close completely during contraction, leading to backward blood flow, which can result in heart failure. A new artificial... Read moreNuclear Medicine
view channel
Novel Radiolabeled Antibody Improves Diagnosis and Treatment of Solid Tumors
Interleukin-13 receptor α-2 (IL13Rα2) is a cell surface receptor commonly found in solid tumors such as glioblastoma, melanoma, and breast cancer. It is minimally expressed in normal tissues, making it... Read more
Novel PET Imaging Approach Offers Never-Before-Seen View of Neuroinflammation
COX-2, an enzyme that plays a key role in brain inflammation, can be significantly upregulated by inflammatory stimuli and neuroexcitation. Researchers suggest that COX-2 density in the brain could serve... Read moreGeneral/Advanced Imaging
view channel
AI-Based CT Scan Analysis Predicts Early-Stage Kidney Damage Due to Cancer Treatments
Radioligand therapy, a form of targeted nuclear medicine, has recently gained attention for its potential in treating specific types of tumors. However, one of the potential side effects of this therapy... Read more
CT-Based Deep Learning-Driven Tool to Enhance Liver Cancer Diagnosis
Medical imaging, such as computed tomography (CT) scans, plays a crucial role in oncology, offering essential data for cancer detection, treatment planning, and monitoring of response to therapies.... Read moreImaging IT
view channel
New Google Cloud Medical Imaging Suite Makes Imaging Healthcare Data More Accessible
Medical imaging is a critical tool used to diagnose patients, and there are billions of medical images scanned globally each year. Imaging data accounts for about 90% of all healthcare data1 and, until... Read more
Global AI in Medical Diagnostics Market to Be Driven by Demand for Image Recognition in Radiology
The global artificial intelligence (AI) in medical diagnostics market is expanding with early disease detection being one of its key applications and image recognition becoming a compelling consumer proposition... Read moreIndustry News
view channel
GE HealthCare and NVIDIA Collaboration to Reimagine Diagnostic Imaging
GE HealthCare (Chicago, IL, USA) has entered into a collaboration with NVIDIA (Santa Clara, CA, USA), expanding the existing relationship between the two companies to focus on pioneering innovation in... Read more
Patient-Specific 3D-Printed Phantoms Transform CT Imaging
New research has highlighted how anatomically precise, patient-specific 3D-printed phantoms are proving to be scalable, cost-effective, and efficient tools in the development of new CT scan algorithms... Read more
Siemens and Sectra Collaborate on Enhancing Radiology Workflows
Siemens Healthineers (Forchheim, Germany) and Sectra (Linköping, Sweden) have entered into a collaboration aimed at enhancing radiologists' diagnostic capabilities and, in turn, improving patient care... Read more