Innovative X-Ray FPS Provides Bedside Imaging Capabilities
By MedImaging International staff writers Posted on 27 Nov 2017 |
Image: New X-ray panels can generate 3D images at the bedside (Photo courtesy of Adaptix).
A new flat-panel source (FPS) makes portable, low-dose, and low-cost three dimensional (3D) digital tomosynthesis (DT) more accessible.
The Adaptix (Begbroke, United Kingdom) FPS is composed of an array of cold cathode field emitters sealed into a unit, together with a power supply. Each field emitter generates a conelet of X-rays, while a proprietary system, designed to avoid the common problem of high-voltage switching, allows for each X-ray emission to be addressed and individually controlled, thus eliminating large numbers of overlapping X-rays. An additional benefit of the design is that the FPS can cover many different angles, allowing depth information to be derived through DT.
The multi-angle imaging is possible without the need to physically move the emitting source, which reduces acquisition time and therefore the risk of motion artifacts. A reduced standoff distance results in reduced power requirements and thermal challenges, compared to conventional X-ray sources, and a further benefit is that beam focal spots are in the sub-millimeter range, providing enhanced resolution. A proprietary image reconstruction solution, developed in conjunction with the University of Oxford (United Kingdom; www.ox.ac.uk), uses sparse data techniques to optimize image reconstruction.
“Avoiding the need to take patients from ICU to the imaging suite for a CT exam would be valued by clinicians and administration in order to avoid the loss of staff on the ward; typically, a transit from ICU to radiology commits a doctor, nurse, and porter for circa 30 minutes,” said the company in a European Commission report summary. “If 3D imaging was available in the ICU it would probably be used more often to answer clinical questions which may be of further value.”
Cold-cathode vacuum tubes do not rely on external heating to provide thermionic emission of electrons. One example of the technology is the Neon lamp, used to produce light as indicators and for special-purpose illumination. The addition of a trigger electrode allows glow discharge to be initiated by an external control circuit. Cold cathodes vacuum tubes sometimes have a rare-earth coating to enhance electron emission.
Related Links:
Adaptix
The Adaptix (Begbroke, United Kingdom) FPS is composed of an array of cold cathode field emitters sealed into a unit, together with a power supply. Each field emitter generates a conelet of X-rays, while a proprietary system, designed to avoid the common problem of high-voltage switching, allows for each X-ray emission to be addressed and individually controlled, thus eliminating large numbers of overlapping X-rays. An additional benefit of the design is that the FPS can cover many different angles, allowing depth information to be derived through DT.
The multi-angle imaging is possible without the need to physically move the emitting source, which reduces acquisition time and therefore the risk of motion artifacts. A reduced standoff distance results in reduced power requirements and thermal challenges, compared to conventional X-ray sources, and a further benefit is that beam focal spots are in the sub-millimeter range, providing enhanced resolution. A proprietary image reconstruction solution, developed in conjunction with the University of Oxford (United Kingdom; www.ox.ac.uk), uses sparse data techniques to optimize image reconstruction.
“Avoiding the need to take patients from ICU to the imaging suite for a CT exam would be valued by clinicians and administration in order to avoid the loss of staff on the ward; typically, a transit from ICU to radiology commits a doctor, nurse, and porter for circa 30 minutes,” said the company in a European Commission report summary. “If 3D imaging was available in the ICU it would probably be used more often to answer clinical questions which may be of further value.”
Cold-cathode vacuum tubes do not rely on external heating to provide thermionic emission of electrons. One example of the technology is the Neon lamp, used to produce light as indicators and for special-purpose illumination. The addition of a trigger electrode allows glow discharge to be initiated by an external control circuit. Cold cathodes vacuum tubes sometimes have a rare-earth coating to enhance electron emission.
Related Links:
Adaptix
Latest General/Advanced Imaging News
- PET Scans Reveal Hidden Inflammation in Multiple Sclerosis Patients
- Artificial Intelligence Evaluates Cardiovascular Risk from CT Scans
- New AI Method Captures Uncertainty in Medical Images
- CT Coronary Angiography Reduces Need for Invasive Tests to Diagnose Coronary Artery Disease
- Novel Blood Test Could Reduce Need for PET Imaging of Patients with Alzheimer’s
- CT-Based Deep Learning Algorithm Accurately Differentiates Benign From Malignant Vertebral Fractures
- Minimally Invasive Procedure Could Help Patients Avoid Thyroid Surgery
- Self-Driving Mobile C-Arm Reduces Imaging Time during Surgery
- AR Application Turns Medical Scans Into Holograms for Assistance in Surgical Planning
- Imaging Technology Provides Ground-Breaking New Approach for Diagnosing and Treating Bowel Cancer
- CT Coronary Calcium Scoring Predicts Heart Attacks and Strokes
- AI Model Detects 90% of Lymphatic Cancer Cases from PET and CT Images
- Breakthrough Technology Revolutionizes Breast Imaging
- State-Of-The-Art System Enhances Accuracy of Image-Guided Diagnostic and Interventional Procedures
- Catheter-Based Device with New Cardiovascular Imaging Approach Offers Unprecedented View of Dangerous Plaques
- AI Model Draws Maps to Accurately Identify Tumors and Diseases in Medical Images